Home> Products

 

[ Page 1 ]  [ Page 2 ]  [ Page 3 ]
 

 
 
KW-8080A & KW-8080M Cable Tester
 



KW-8080A


 



KW-8080M

 

   

 MODEL 8080A 8080M
 TEST POINT 128,256,384,512 128,256,384,512
 CONTINUITY R. 100,500,1K, 5K, 10K, 50KΩ 11K, 5K, 10KΩ
 INSULATION R. 500K, 1M, 2M, 5M, 7M, 10M, 20MΩ 500K, 1M, 2M, 7MΩ
 TEST VOLTAGE 15Vdc 15Vdc
 TEST CURRENT 15mA(MAX) 5mA(MAX)
 TEST SPEED 40960P-P/sec 27000P-P/sec
 STANDARD INTERFACE Printer Port Printer Port
 OPTION INTERFACE PLC, PC -Link PC -Link
 FIXTURE INTERFACE 64 Pin Flat Cable 64 Pin Flat Cable
 DISPLAY 2 Lines x 20 Character 2 Lines x 20 Character
 STEP TEST FUNCTION Yes, (MAX. 99Step) Yes, (MAX. 99Step)
 BARE-END TEST FUNCTION Yes, A port 64pin Yes, A port 64pin
 SEQUENTIAL TEST FUNCTION Yes Yes
 SEARCH FUNCTION Yes Yes
 INTERMITTENCE TEST FUNCTION Yes, Faster Yes, Faster
 OPEN-SIDE DISTINGUISHABLE Yes, Show a or b Lower Case Yes, Show a or b Lower Case
FIXTURE SHORT TEST Yes, Auto-Test When Power On Yes, Auto-Test When Power On
INTERMITTENCE LOCK FUNCTION Lock/Unlock Lock/Unlock
ERROR MESSAGE DISPLAY SETTING All Error, or 1~8 Set All Error, or 1~8 Set
FAULT RESULTS Display Automatically Display Automatically
DELAY TIME SETTING Yes, 1 ~ 50 Counter Yes, 1 ~ 50 Counter
VOLUME ADJUSTABLE 7 Steps Volumes, Individual Pass/fail Sounds 7 Steps Volumes, Individual Pass/fail Sounds
No. OF KEY 16 Key 12 Key
POWER 100~260VAC  50/60Hz 100~260VAC  50/60Hz
OPERATION TEMP 10캜 ~ 40캜 10캜 ~ 40캜
DIMENSION 400x350x145mm (1.99 Measurement) 400x350x145mm (1.99 Measurement)
WEIGHT N.W.: 7kg G.W.: 10 kg N.W.: 7kg G.W.: 10 kg

 


KW-201 Electrical Cable Stranding Machine (Three Axles)
 

 
  • This machine is suitable to strand the three head of cable with even strength and high quality
  • The main purpose of the third axle is to isolate the grounding net cable in the place of conventional manual cable twisting operation.
  • The cable twisting fixture can be easily replaced with strong torque an simple operation.
 MODEL KW-201
 Dimension 315 x 205 x 275 m/m
 Weight 17.5kg
 Motor AC
 S.P.M Max 2200 / minute (adjustable)
 Power supply 110/220V 50/60Hz
 Processing wire AWG# 32~ AWG# 18


KW-201


 


KW-8501 Modular Plug Auto Termination Machine
 

 
  • Capable of pressing general PC heads and British style PC heads, as well as electronic assembling
  • Entirely noiseless operation
  • Easy to operate and high precision
  • Spacious and easy to relocate
  • It takes merely three minutes to replace the moulds
 MODEL KW-8501
 Dimension 330x160x160 m/m
 Weight 12kg
 Power supply AC 110V/220V 50/60Hz
 Stroke length RPM 75:150Kg
  RPM 90:120Kg
  RPM 120:95Kg



KW-8501


 


KW-8602 Modular Plug Terminal Depth Gauge
 

 
  • Can test and measure all kinds of Modular Plug Terminal Depth
  • Precision reach up to 0.005 m/m
  • Simple and quick operation
 MODEL KW-8602
 Dimension 305x150x150 m/m
 Net Weight 10.5kg
 Power supply AC 110V/220V/240V
 Maximum Pressing Strength RPM 75:150Kg
  RPM 90:120Kg
  RPM 120:95Kg


KW-8602


[ Page 1 ]  [ Page 2 ]  [ Page 3 ]
 

 Copyright 2003-2006 Kawa Machine Tools Sdn Bhd, Malaysia. All Rights Reserved. Designed by JustSimple